A wooden Twist-Off lid with an iron insert that is already glued to the wood (it cannot be removed). The lid is made of natural alder and coated with a special proprietary technology without the addition of varnish and paint.
It is suitable for semi-liquid contents, as the insert prevents the product from contacting the wood.
Some product properties may vary from batch to batch. The manufacturer has the right not to warn the buyer about this if the changes are not significant and do not affect the operational features.
The pattern and color of the wood do not depend on the batch or the craftsman, and therefore cannot be repeated. The likelihood of getting two exactly the same products in terms of pattern and color is low.
We strongly recommend that you pay attention and heed the advice on the use and care of this product:
Avoid moisture and damp areas. In the event of contact with moisture, wipe the product with petroleum jelly and allow to dry. Wipe off any residue with a dry cloth.
Maintain optimal temperatures between +18 and +23 degrees Celsius. At high or low temperatures, the wood dries out and can get stuck on the glass forever.
Coat the wood with petroleum jelly every month under optimal conditions and moderate humidity. If the humidity is higher, then cover it every 1-2 weeks.
How and with what to cover the products yourself?
Vaseline oil is the best choice because it does not leave odors. Coat the wood with petroleum jelly every month under optimal conditions and moderate humidity. If the humidity is higher, then cover it every 1-2 weeks. Simply apply a small amount of oil to the product with a brush, napkin or sponge, leave it on for a while, and remove the rest with a dry napkin or natural cloth. After all the manipulations, the product is completely suitable for further use.
Provided that all the recommendations have not been followed by the buyer, we cannot consider requests for the return of goods or complaints about the discrepancy in the appearance and other properties of the products after use.